Wheel Alignment in Auckland – All you need to remember

Wheel alignment, often referred to as tire alignment, can help the tyres work properly and help them last longer. It can also enhance handling and prevent your car from pulling in one direction or oddly vibrating on the lane. 

What is wheel Alignment?

Alignment refers to an adaptation of the suspension of a vehicle – the mechanism that links a vehicle to its wheels. It is not an adaptation to the wheels or tyres themselves. Adjusting the angles of the tyres, which influences how they make contact with the road, is the key to proper alignment. 

How do I know if a wheel alignment is needed?

There are a few ways to tell if a tyre alignment is necessary for your vehicle.  You can have your alignment tested by a licensed service technician immediately if you have found one or more of these indications. 

  • Vibration of the steering wheel
  • A vehicle which pulls to the left or right
  • Uneven wear of the tread
  • The steering wheel is off-center if you drive straight.

Caster, Toe & Camber

When your cheap tyres in Auckland is tested by a technician, he or she is primarily concerned with three things:

1.    Caster

Your caster angle allows stability, steering and cornering to balance. Specifically when viewed from the side of your car, it’s your steering axis angle. If the caster is confident, the steering axis will be tilted towards the operator. On the other side, negative caster means the steering axis tilts to the front of your car. 

2.    Toe

Toe alignment, is the degree to which, when viewed from above, your tyre turns inward or outward. Or stand up and look down at your feet if that’s confusing. Edge them inward toward your body’s heart. We call this toe-in alignment when the tyres on your vehicle are pointed the same direction. Angle your feet outward and you have balance of the toe-out. Both need alteration. 

3.    Camber

As viewed from the front of the car, this is the inward or outward angle of the tyre. Too much inward or outward tilt also referred to as negative and positive camber reveals incorrect alignment and may have to be changed. Camber misalignment can lead to worn bearings, ball joints and other wheel suspension components. 

If I don’t have my tyres aligned, what happens?

We just cringe knowing that someone never has an alignment carried out on his or her vehicle. What’s going to potentially end up happening is that you’re going to pour a lot of money down the drain on tyres because tyres wear down a lot faster without proper alignment. And when you’re driving, you’ll most definitely find something’s wrong: your car will probably not perform as well as it should and, in the most serious cases, you will have a pretty rough time keeping your ride under control altogether. Luckily for you, all this bad news is easily preventable by keeping your wheels aligned as appropriate. 

Leave a Reply

Your email address will not be published. Required fields are marked *